JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Resin too low #10108 (SL1/SL1S)

Menu
Relevant for:
Last updated 2 years ago
This article is also available in following languages: 
ENCSPLDEESITFR

What happened?

The printer is displaying the message: Measured resin volume [amount] ml is lower than required for this print. Please refill the tank and restart the print.

Error name: Resin too low

Error code: #10108

Issued when the resin in the tank is in a smaller amount than the one necessary to start the print.

How to fix it?

When the resin sensor is on, the SL1 needs a minimal amount of resin volume for the print to start. Getting this error means that your tank is below the minimal limit. To start the print, add the level of resin recommended for the model you are using.

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us