JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Resin too high #10109 (SL1/SL1S)

Menu
Relevant for:
Last updated 2 years ago
This article is also available in following languages: 
ENCSPLDEESITFR

What happened?

The printer is displaying the message: Measured resin volume [amount] ml is higher than required for this print. Make sure that the resin level does not exceed the 100% mark and restart the print.

Error name: Resin too high

Error code: #10109

Issued when the resin level is too high and needs some resin needs to be removed before the print.

How to fix it?

If the print starts, the tank movements might spill the resin to the parts below. Pour some of the resin back into the bottle through a filter until you have just the amount of resin required for the print.

If the resin spills from the tank please clean as much as possible with a paper towel and contact our カスタマーサポート.

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us