The printer is displaying the message: Reading of sensor not in range! Measured temperature: (temperature). Keep the printer out of direct sunlight at room temperature (18 - 32 °C).
Error name: Temperature out of range
Error code: #10211
Starting from firmware 1.7.0, this error replaces Temperature out of range #10208 (SL1/SL1S).
To ensure smooth operation, the printer has a set working temperature between 18 - 32 °C (64 - 89 °F). Direct sunlight or a cold garage is not ideal. Try to move the printer to a more stable indoor environment, let the temperature equalize over 30 minutes to 1 hour, and try again.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.