⬢This guide will take you through the installation of the Buddy3D camera mount on your Original Prusa XL.
Before starting, ensure you have printed all the necessary parts.
The printed parts can be found on Printables.com.
JA
Login- English
- Čeština
- Deutsch
- Polski
- Français
- Home
- XL
- このプリンターを使用
- プリンターメンテナンス
- How to set up a Buddy Cam
How to set up a Buddy Cam
Menu
- プリンターメンテナンス
- How to replace a Z-axis motor (XL)
- Prusaノズル（XLマルチツール）の交換方法
- Packing the XL Multi-tool for return - Original Packing material
- How to fix Modular bed error (HW solution)
- How to replace trapezoid nuts (XL)
- How to replace the Hotend assembly (XL multi-tool)
- How to replace a profile insert (XL)
- How to lubricate the coupler pins on Original Prusa XL (Multi-Tool)
- How to replace the Sandwich Board (XL)
- ネクストルーダーV6ノズルアダプターの取り付け方法 (XLマルチツール)
- How to replace a XY motor (XL)
- How to change the belt (XL)
- How to replace the CoreXY plastic parts
- Packing the XL Enclosure for return - Original Packing material
- How to replace Nextruder heatsink (XL Multi-tool)
- How to install the Nextruder V6 Nozzle Adapter (XL single-tool)
- How to replace the Prusa Nozzle (XL single-tool)
- How to replace the Hotend assembly (XL single-tool)
- Packing printer for transport - Original Packing Material (XL)
- How replace the CoreXY Cover Rear (Original Prusa XL)
- How to replace a heatbed tile and a heatbed tile cable (XL)
- How to replace a print fan (XL single tool)
- How to clean the side filament sensor (XL)
- How to change xLCD and xLCD cable (XL single-tool)
- How to replace a Dwarf board (XL multi-tool)
- How to replace a Dwarf board (XL single-tool)
- How to replace a hotend thermistor (XL Single-Tool)
- How to replace a Z-axis linear rail (XL)
- How to replace the hotend fan (XL Multi-tool)
- How to replace a PSU (XL)
- How to replace a hotend heater (XL Single-Tool)
- How to replace the tch-profile-insert (XL)
- How to replace the rubber band on Original Prusa XL (Multi-tool)
- How to change the xLCD (XL)
- How to lubricate linear bearing rails (XL)
- How to set up a Buddy Cam
- 1. Introduction
- 2. XL: parts preparation
- 3. CoreXY & frame holder preparation
- 4. Frame clip preparation
- 5. Frame holder securing
- 6. Buddy cam securing
- 7. XL+ENC: parts preparation
- 8. Frame holder securing
- 9. Buddy cam securing
- How to replace Nextruder heatsink (XL Single-tool)
- How to replace a Nextruder (XL)
How to set up a Buddy Cam
Relevant for:
Last updated 3 days ago Difficulty
Very easy Steps
9 Available languages
⬢For this guide, please prepare:
⬢Fixing-card (1x)
⬢M3x10 screw (3x)
⬢Frame-clip (2x)
⬢XL-Cam-holder (1x)
⬢XL-frame-holder (1x)
⬢Attach the XL-cam-holder to the XL-frame-holder and secure it with one M3x10 screw using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Using a T10 Torx screwdriver, remove the M3x8bT from the frame. Don't throw the screw away!
⬢From the outside of the right XY core, insert one frame-clip into the extrusion and rotate it by 90° clockwise. Hint: use the Needle-nose pliers to rotate the frame-clip.
⬢Insert the second frame-clip with the same process.
⬢Using a fixing-card, align the frame-clips on the left side of the extrusion.
⬢Attach the prepared XL-frame-holder and attach it onto the frame-clips.
⬢Secure the XL-frame-holder with two M3x10 using a 2.5 mm Allen key. Do not overtighten the screws!
⬢Insert and secure the M3x8bT screw using a T10 Torx screwdriver. Do not overtighten the screw!
⬢Align the Buddy3D cam with the XL-cam-holder as in the picture.
⬢While holding the XL-frame-holder from the right side, attach the Buddy cam to the XL-cam-holder.
⬢Turn the Buddy3D cam 90° clockwise to secure it in its position.
⬢Connect the camera with a USB-C cable.
⬢次のステップのために、次のものをご用意ください：。
⬢XL-ENC-frame-holder (1x)
⬢M3x10 screw (3x)
⬢XL-Cam-holder (1x)
⬢Attach the XL-cam-holder to the XL-ENC-frame-holder and secure it with one M3x10 screw using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Open the lid.
⬢Attach the prepared XL-ENC-frame-holder to the upper left corner inside the XL Enclosure.
⬢Secure the XL-ENC-frame-holder with two M3x10 screws using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Align the Buddy3D cam with the XL-cam-holder as in the picture.
⬢Attach the Buddy3D cam to the XL-cam-holder and turn the Buddy3D cam 90° clockwise to secure it in its position.
⬢Connect the camera with a USB-C cable.
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.