⬢For this guide, please prepare:
⬢Fixing-card (1x)
⬢M3x10 screw (3x)
⬢Frame-clip (2x)
⬢XL-Cam-holder (1x)
⬢XL-frame-holder (1x)
EN
Login- Čeština
- Deutsch
- Français
- Home
- XL
- Using the printer
- Printer maintenance
- How to set up a Buddy Cam
How to set up a Buddy Cam
Menu
- Printer maintenance
- How to replace a Z-axis motor (XL)
- How to replace the Prusa Nozzle (XL multi-tool)
- Packing the XL Multi-tool for return - Original Packing material
- How to fix Modular bed error (HW solution)
- How to replace trapezoid nuts (XL)
- How to replace the Hotend assembly (XL multi-tool)
- How to replace a profile insert (XL)
- How to lubricate the coupler pins on Original Prusa XL (Multi-Tool)
- How to replace the Sandwich Board (XL)
- How to install the Nextruder V6 Nozzle Adapter (XL Multi-Tool)
- How to replace a XY motor (XL)
- How to change the belt (XL)
- How to replace the CoreXY plastic parts
- Packing the XL Enclosure for return - Original Packing material
- How to replace Nextruder heatsink (XL Multi-tool)
- How to install the Nextruder V6 Nozzle Adapter (XL single-tool)
- How to replace the Prusa Nozzle (XL single-tool)
- How to replace the Hotend assembly (XL single-tool)
- Packing printer for transport - Original Packing Material (XL)
- How replace the CoreXY Cover Rear (Original Prusa XL)
- How to replace a heatbed tile and a heatbed tile cable (XL)
- How to replace a print fan (XL single tool)
- How to clean the side filament sensor (XL)
- How to change xLCD and xLCD cable (XL single-tool)
- How to replace a Dwarf board (XL multi-tool)
- How to replace a Dwarf board (XL single-tool)
- How to replace a hotend thermistor (XL Single-Tool)
- How to replace a Z-axis linear rail (XL)
- How to replace the hotend fan (XL Multi-tool)
- How to replace a PSU (XL)
- How to replace a hotend heater (XL Single-Tool)
- How to replace the tch-profile-insert (XL)
- How to replace the rubber band on Original Prusa XL (Multi-tool)
- How to change the xLCD (XL)
- How to lubricate linear bearing rails (XL)
- How to set up a Buddy Cam
- 1. XL: parts preparation
- 2. CoreXY & frame holder preparation
- 3. Frame clip preparation
- 4. Frame holder securing
- 5. Buddy cam securing
- 6. XL+ENC: parts preparation
- 7. Frame holder securing
- 8. Buddy cam securing
- How to replace Nextruder heatsink (XL Single-tool)
- How to replace a Nextruder (XL)
How to set up a Buddy Cam
Relevant for:
Last updated 5 days ago Difficulty
Very easy Steps
8 Available languages
⬢Attach the XL-cam-holder to the XL-frame-holder and secure it with one M3x10 screw using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Using a T10 Torx screwdriver, remove the M3x8bT from the frame. Don't throw the screw away!
⬢From the outside of the right XY core, insert one frame-clip into the extrusion and rotate it by 90° clockwise. Hint: use the Needle-nose pliers to rotate the frame-clip.
⬢Insert the second frame-clip with the same process.
⬢Using a fixing-card, align the frame-clips on the left side of the extrusion.
⬢Attach the prepared XL-frame-holder and attach it onto the frame-clips.
⬢Secure the XL-frame-holder with two M3x10 using a 2.5 mm Allen key. Do not overtighten the screws!
⬢Insert and secure the M3x8bT screw using a T10 Torx screwdriver. Do not overtighten the screw!
⬢Align the Buddy3D cam with the XL-cam-holder as in the picture.
⬢While holding the XL-frame-holder from the right side, attach the Buddy cam to the XL-cam-holder.
⬢Turn the Buddy3D cam 90° clockwise to secure it in its position.
⬢Connect the camera with a USB-C cable.
⬢For the next steps, please prepare:
⬢XL-ENC-frame-holder (1x)
⬢M3x10 screw (3x)
⬢XL-Cam-holder (1x)
⬢Attach the XL-cam-holder to the XL-ENC-frame-holder and secure it with one M3x10 screw using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Open the lid.
⬢Attach the prepared XL-ENC-frame-holder to the upper left corner inside the XL Enclosure.
⬢Secure the XL-ENC-frame-holder with two M3x10 screws using a 2.5 mm Allen key. Do not overtighten the screw!
⬢Align the Buddy3D cam with the XL-cam-holder as in the picture.
⬢Attach the Buddy3D cam to the XL-cam-holder and turn the Buddy3D cam 90° clockwise to secure it in its position.
⬢Connect the camera with a USB-C cable.
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.