English
Italiano
Deutsch
Polski
Français

USB Port Overcurrent #17306 (XL)

Relevante para :

Ultima actualización a year ago

Este artículo está también disponible en los siguientes idiomas:

What happened?

The Original Prusa XL is showing the message "Overcurrent detected on USB port."

Error name: USB Port Overcurrent

Error code: #17306

The error is shown when there is a damaged cable on the LCD or any of its connections.

How to fix it?

Before accessing any of the electronic boards, ensure that the printer is fully cooled down, and switched off for at least 10 minutes.

The most likely cause of this issue is damage to the LCD cable. Check the path between the LCD and the Sandwich board, and see if there are any parts that are broken or pinched.

In case there is no damage, check the cable connection to the LCD board and to the Sandwich board. Try reconnecting the connectors.

Are you still having issues? Contact our support team and let them know that you tried to fix the issue with these instructions. We will take it from there.

¿Fue útil este artículo?

Fácil de comprender

Resolvió mi problema

Otra razón

Comentarios

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.

Contacta con nosotros