The printer is displaying the message: The printer has booted from an alternative slot due to failed boot attempts using the primary slot. Update the printer with up-to-date firmware ASAP to recover the primary slot. This usually happens after a failed update, or due to a hardware failure. Printer settings may have been reset.
Error name: Boot slot changed
Error code: #10601
Try to flash the firmware again. Try to avoid using OTA flashing as your network can be a factor. If it persists, it may indicate an issue with the on-board eMMC storage and the board may need to be replaced. If so, please contact support.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.