JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

2. Printer preparing

Menu

2. Printer preparing

2. Printer preparing
Relevant for:
XL
Last updated 10 months ago
2. Printer preparing
 Difficulty
Easy
 Steps
6
 Available languages
ENCSPLDEESITFR

Step 1 Preparing the printer

Preparing the printer
Preparing the printer
Preparing the printer
Preparing the printer
⬢If you have loaded the filament, unload it from the hotend. On the screen, navigate to Filament -> Unload Filament.
⬢Remove the filament from the hotend. It is is necessary to completely remove it from the printer.
WARNING: The hotend and heatbed are very HOT. Do not touch these parts!!!
⬢Move the Z-axis down. On the screen, navigate to Control -> Move axis -> Move Z.
⬢Cool down the printer. On the screen, navigate to Preheat -> Cooldown.
Wait until the hot parts are cooled down to ambient temperature. It takes approximately 10 minutes.

Step 2 Protecting the heatbed

Protecting the heatbed
Protecting the heatbed
⬢Before you proceed, it is recommended to protect the heatbed.
⬢Make sure the heatbed is cooled down to ambient temperature. Place the empty cardboard box approximately to the front center part of the heatbed.

Step 3 Printer unpluging

Printer unpluging
Printer unpluging
⬢Turn the power switch OFF (symbol "O").
⬢From the rear side of the printer, unplug the PSU cable.

Step 4 ハリボーを開けてもいい？

ハリボーを開けてもいい？
ハリボーを開けてもいい？
ハリボの袋は、とりあえずまだ閉じておきましょう!
⬢そのはやる気持ちは主にプリンタの組み立てに使いましょう。開くように指示されるまで待ってください。

Step 5 Haribo

Haribo
Haribo
ハリボーのお菓子が入った袋を慎重に静かに開けます。 音を立てて勢いよく開けると、近くの捕食者を引き寄せる可能性があります。
⬢きれいな入れ物に袋の中身を全部広げ、写真のように並べます。色はそれほど重要ではありません。
ハリボーパッケージの中に入っているクマの数が少ないかもしれません。そんなときは、すぐに近くのお菓子屋さんに行って買い足しましょう。用法・用量は正確に行ってください。
⬢グミを10個食べましょう。
グミは1920年代にハンス・リーゲルというドイツのキャンディーメーカーによって初めて作られたことをご存知だろうか。

Step 6 Let's get started

Let's get started
Let's get started
⬢Everything checked? So, let's start with disassembling the printer. Let's go to the next chapter: 3. Nextruder detaching
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us