日本語

Prusa Research a.s.

Prusa Research a.s.

サポート
Original Prusa Enclosure
Original Prusa Enclosure assembly (NEW) [進行中の翻訳] (1.1)
2A. Preparing the printer (MK4/S & MK3.9/S) | Important information

1. Important information

Step 1 of 18 (Chapter 2 of 20)

内容

コメント

⬢This manual is fully compatible with the MK4/S printer. The pictures are of the MK4, but the assembly is the same.

Loading...

内容

Original Prusa Enclosure assembly (NEW) [進行中の翻訳] (1.1)

1. Introduction
2A. Preparing the printer (MK4/S & MK3.9/S) [進行中の翻訳]
1. Important information
2. Tools necessary for this chapter
3. Preparing the printer
4. Releasing the PSU cables
5. Releasing the PSU
6. Removing the PSU
7. Guiding the cables: parts preparation
8. Guiding the cables
9. Guiding the cables
10. Mounting the printer frame support: part preparation
11. Mounting the printer frame support
12. Mounting the printer frame support
13. Covering the PSU cables: parts preparation
14. Covering the PSU cables
15. Fitting: parts preparation
16. Installing the fitting
17. Haribo time!
18. The printer is prepared
2B. Preparing the printer (MK3.5 Black PSU)
2C. Preparing the printer (MK3S+ Black PSU)
2D. Preparing the printer (MK3S+ Silver PSU)
3. Assembling the enclosure
4A. Installing the printer (MK4/S & MK3.9/S)
4B. Installing the printer (MK3.5 Black PSU)
4C. Installing the printer (MK3S+ Black PSU)
5. Fire Suppression System (add-on)
4D. Installing the printer (MK3S+ Silver PSU)
6. Hinged Lid (add-on)
6A. Hinged Lid with MMU3
6B. Hinged lid with MMU2S
7. Advanced filtration system (add-on)
8. Mechanical lock (add-on)
9. Quick release PSU cable - MK3S+ Black PSU (add-on)
10. Quick release PSU cable - MK4/3.9 Black PSU (add-on)
11. White LED strip (add-on)
Manual changelog Enclosure

コメント

ログインしてコメントを投稿する

コメントなし