Creating MMU models: Export model from Fusion 360
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
- Home
- 3D models
3D models
Guides
All articles
Printable parts for Original Prusa
Plastic parts used on our 3D printers are printed by the same machines, holding on to the original idea of the RepRap project. If you want to print replacement parts ...
Creating your own 3D models
Creating a brand new 3D model from scratch can be a little daunting if you have no prior experience. However, at some point, you will probably run out of pre-made ...
Where can you get 3D models?
The best way to get started with 3D printing is to find pre-made models on the internet - they should be in the .stl, .obj or .3mf format to be ...
Modeling with 3D printing in mind
Modeling for 3D printing presents several interesting challenges. FFF (Fused Filament Fabrication) with its layer-by-layer manufacturing process, the orientation and geometry can greatly affect both the aesthetic and integrity of ...
Corrupted 3D models for printing
You’d be surprised how many 3D models you can find on the internet are broken in some way. Modern slicers are pretty good at repairing the models without you even ...
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.