EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Unknown printer model #10323 (SL1/SL1S)

Menu
Relevant for:
Last updated a year ago
This article is also available in following languages: 
CSPLDEESITFR

What happened?

The printer is displaying the message: The printer model was not detected.

Error name: Unknown printer model

Error code: #10323

This error happens when the printer cannot identify if the printer is the Original Prusa SL1 or SL1S SPEED. The model of the printer is determined by the exposure display.

How to fix it?

Update the firmware again

If the error appears after updating the firmware and the printer was previously working fine, please download and flash the firmware again using the supplied USB stick (not OTA). Please see our dedicated article for details.

Checking the display's connection

If updating the firmware again does not resolve it, it is necessary to check the print display's connection and its cable. Open the bottom cover from the printer, being careful of the USB & Power cable.

 

 

 

Check if the display is well connected to the board and that the cable is facing the outside of the printer, not stuck behind the electronics holder.

Connection on the SL1Connection on the SL1S
Was this article helpful?

Comments

Related

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us