1. Tools necessary for this chapter

MINI+ kit assembly (draft) [進行中の翻訳] (v1.09)

• 1. Introduction
• 2. YZ - axis assembly
• 3. X-axis & Extruder assembly
• 4. Print head & Heatbed assembly
• 5. LCD assembly & Electronics [進行中の翻訳]
  1. Tools necessary for this chapter
  2. LCD assembly: parts preparation
  3. Mounting the LCD
  4. Connecting the LCD
  5. LCD cable guidance
  6. LCD assembly: reward yourself!
  7. Optional: ESP Wi-Fi Module
  8. Power switch: parts preparation
  9. Mounting the power switch
  10. 電源スイッチの接続
  11. Filament sensor: parts preparation (optional)
  12. Filament sensor: parts preparation (optional)
  13. Filament sensor assembling (optional)
  14. Filament sensor assembling (optional)
  15. Filament sensor assembling (optional)
  16. Filament sensor assembling (optional)
  17. フィラメントセンサーの取り付け (オプション)
  18. フィラメントセンサーの接続（オプション）
  19. Connecting the electronics
  20. Connecting the electronics
  21. Covering the electronics: parts preparation
  22. Covering the electronics
  23. シルバーラベル の貼り付け
  24. Electronics: reward yourself!
  25. LCD assembly & Electronics are finished!
  26. New vs old Spool holder assembly
• 6A. Spool holder assembly
• 6B. Spool holder assembly
• 7. Preflight check
• Manual changelog MINI+ kit