JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

G-code preparation for MMU2S

G-code preparation for MMU2S

G-code preparation for MMU2S
Relevant for:
Last updated 2 years ago
G-code preparation for MMU2S
 Difficulty
Moderate
 Steps
8
 Available languages
ENCSPLESDEITFR
Download the latest drivers
Download the latest drivers
Download the latest drivers
We recommend to have installed always the latest release of Prusa drivers, you can download them here: prusa3d.com/drivers
After you finish the installation, run Slic3r Prusa Edition.
Ensure you have selected the proper settings for multi material print. You need to select Original Prusa i3 MK2 Multi Material 2.0 printer.
If you can't select the MMU2 printer, run the "Configuration Wizard" to add it.
This guide is based on drivers - version 2.2.0 (Slic3r PE 1.41.0).
Import an object into PrusaSlicer
Import an object into PrusaSlicer
Import an object into PrusaSlicer
Prepare your model separated in multiple .stl files or .amf/.3mf bundle, if you don't have it yet, please visit our guide: Private: Export model from Fusion 360 (OLD) [進行中の翻訳]
If you prefer to use your own model, please visit our guide: Creating MMU models: Export model from Fusion 360 [進行中の翻訳]
Select file or multiple files and load them by clicking on the button Open, you can also Drag&Drop the file(s) into Slic3r PE.
Slic3r PE recognizes a multi-part object and offers to import it as a single object. Click "Yes".
(Optional) Spliting a single STL to parts
(Optional) Spliting a single STL to parts
(Optional) Spliting a single STL to parts
If you have a single STL file that consists of separate bodies, you might need to right-click the imported object and select Split>To parts
The object will change into a multi-part object (the parts won't move one relative to the other). This way, you will be able to assign a different color to each part later on.
Assign colors to Extruders
Assign colors to Extruders
Assign colors to Extruders
Assign colors to Extruders
Double-click on the object. Assign an extruder (filament) for each part of the object. Click OK when all parts are assigned.
You can assign a colour for each extruder to preview the final look. Double-click on the left part of each Filament field a colour palette will appear.
In the Extruder field, assign a correct extruder to each part of the object. You should be able to see the object in the colors it is going to be printed with.
Position the Wipe tower
Position the Wipe tower
Position the Wipe tower
Position the Wipe tower
Ensure the Wipe tower is enabled and visible.
If you can't see the Wipe tower in the 3D view, open Print settings and click on Multiple Extruders and select Enable.
You can adjust tower's position by:
Ensure the Wipe tower ISN'T COLLIDING with the printed object!!!
Print settings and Filament
Print settings and Filament
Before you proceed to slicing, please select the Print settings (layer height) and your Filaments (material).
For the latest list of supported materials and print quality please always read our Multi Material Handbook: prusa3d.com/3dhandbookMMU2
Slic3r PE offers many more settings to be changed. You can leave the recommended values or adjust them. However, this is for experienced users.
Slice, export and print!
Slice, export and print!
Slice, export and print!
Slice, export and print!
We are almost done, now just:
Press Slice now and wait until slicing is complete.
Check your print including Wipe tower in the Preview tab.
When you feel satisfied with the Preview, click on Export G-code and name your new model.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us