1. Tools necessary for this chapter

Růženka Upgrade Final [進行中の翻訳] (v1.00)

• 1. はじめに
• 2. Disassembling the SL1
• 3. Upgrading to SL1S SPEED [進行中の翻訳]
  1. Tools necessary for this chapter
  2. Boost board: parts preparation
  3. Protecting the electronics
  4. Attaching the thermal pad
  5. Assembling the Boost board
  6. Mounting the Input cover: parts preparation
  7. Mounting the Input cover
  8. Mounting the Boost board
  9. Connecting the power cable
  10. Assembling the power switch: parts preparation
  11. Assembling the power switch
  12. Assembling the power switch
  13. Connecting the boost cables: parts preparation
  14. Connecting the boost cables
  15. Installing the new resin sensor cable: parts preparation
  16. Installing the resin sensor cable
  17. Connecting the resin sensor cable
  18. Connecting the A64 boost cable
  19. Connecting the A64 boost cable
  20. Connecting the Boost motion cable
  21. Disconnecting the thermistor cable
  22. Re-connecting the thermistor cable
  23. Mounting the UV LED assembly: parts preparation
  24. Mounting the UV LED assembly: parts preparation
  25. Mounting the UV LED assembly
  26. Preparing the UV LED assembly area
  27. Disconnecting the optical sensor cable
  28. Guiding the optical sensor cable
  29. Inserting the UV LED assembly
  30. Inserting the UV LED assembly
  31. Mounting the UV LED assembly
  32. Aligning the UV LED assembly
  33. Securing the UV LED assembly
  34. Checking the connecting rod
  35. Connecting the UV LED assembly: parts preparation
  36. Connecting the UV LED assembly
  37. Guiding the UV LED cable
  38. Assembling the blower fan: parts preparation
  39. Assembling the blower fan
  40. Assembling the blower fan
  41. Assembling the blower fan
  42. Mounting the Blower fan assembly
  43. Installing the print display: parts preparation
  44. Mounting the Prusa LCD adapter
  45. Installing the new print display
  46. Connecting the print display cable: New vs old
  47. Installing the LCD adapter spacer (NEW)
  48. Connecting the print display cable (NEW)
  49. Installing the LCD adapter spacer (OLD)
  50. Connecting the print display cable (OLD)
  51. Checking the print display cable
  52. Cable management
  53. Connecting the power button
  54. Mounting the cover
  55. Upgrading the print platform: parts preparation
  56. Upgrading the print platform
  57. New resin tank: parts preparation
  58. レジンタンクフレームの準備
  59. FEPフィルムの準備
  60. レジンタンクフレームの準備
  61. Inserting the screws
  62. レジンタンクの取り付け
  63. レジンタンクの取り付け
  64. レジンタンクの取り付け
  65. Mounting the platform
  66. It's done!
• 4. Firmware upgrading
• 5. Calibrating the printer
• 6. First print
• 7. Manual changelog