JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

1. Introduction

Menu

1. Introduction

1. Introduction
Relevant for:
MMU3
Last updated 19 days ago
1. Introduction
 Difficulty
Easy
 Steps
8
 Available languages
ENCSPLDEESITFR

Step 1 Important

Important
Important
Important
⬢Congratulations on your purchase of the assembled Original Prusa MK4S with MMU3!
⬢This guide is dedicated only to the set of assembled MK4S with MMU3 from factory. If you ordered only assembled MMU3 unit and purchased the printer separately, please use this guide Original Prusa MMU3 Assembly
Even though this is an assembled version, there are still a few accessories to assemble before you can start printing:
⬢Cassette Buffer Assembly
⬢Spool Holder Assembly (5x)
⬢Follow the instructions carefully, and proceed with the assembly.

Step 2 Tools required

Tools required
Tools required
Tools required
⬢The following chapters require:
⬢2.5mm Allen key
⬢Side cutters

Step 3 高解像度の画像を見る

高解像度の画像を見る
高解像度の画像を見る
⬢help.prusa3d.comのガイドをブラウズすると、オリジナルの画像を高解像度で鮮明に見ることができます。
⬢画像にカーソルを合わせ、左上にある拡大鏡アイコン（「オリジナルを表示」）をクリックするだけです。

Step 4 Labels guide

Labels guide
Labels guide
Labels guide
Labels guide
⬢パーツの入った箱や袋にはすべてラベルが貼られています。
⬢ラベルの部品図面のほとんどは1:1の縮尺であり、部品を特定するために使用できます。
⬢You can download and 2D print a Prusa Cheatsheet with the 1:1 scaled fastener drawings. help.prusa3d.com/cheatsheet. Print it at 100 %, don't rescale it, otherwise, it won't work.

Step 5 Prusa Nozzle info

Prusa Nozzle info
Prusa Nozzle info
There are two variants of the Prusa Nozzle that we ship with the printers:
⬢Prusa Nozzle brass CHT high flow (marked CHT)
⬢Prusa Nozzle brass (marked PR)
⬢Your MK4S came equipped with the Prusa Nozzle brass by default.
While it is possible to print with the Prusa Nozzle CHT, please note that specific settings are required for high quality prints.
⬢The Prusa Nozzle CHT is also included in your MMU3 package.
⬢To replace the nozzle on the MK4S, please follow the instructions provided in the dedicated manual How to replace the Prusa Nozzle (MK4S/MK3.9S).

Step 7 Prepare your desk

Prepare your desk
Prepare your desk
⬢机を片付けましょう！片付けることで、小さな部品を紛失する確率が減ります。
⬢

作業スペースを確保します。十分なスペースを確保しましょう。すっきりとした平らな作業台があれば、良好な結果が得られるでしょう。

⬢光あれ！明るい環境にいることを確認してください。別途、手元を照らすライトや予備の懐中電灯があると便利でしょう。
⬢ビニール袋や取り外した梱包材を入れるものを用意し、後で分別できるようにしておきましょう。また、重要な部品が取り残され、廃棄されていないかを確認してください。

Step 8 Preparing the printer

Preparing the printer
Preparing the printer
⬢Carefully remove the test print from the print sheet.
⬢Remove the print sheet and put it aside for a while.
⬢All set? Let's move on to the next chapter: 2. Cassete Buffer Assembly
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us