JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

1. はじめに

Menu

1. はじめに

1. はじめに
Relevant for:
MMU1MMU2S
Last updated a year ago
1. はじめに
 Difficulty
Moderate
 Steps
3
 Available languages
ENCSPLESDEITFR

Step 1 Preparing MMU1 to MMU2S upgrade kit

Preparing MMU1 to MMU2S upgrade kit
Preparing MMU1 to MMU2S upgrade kit
Preparing MMU1 to MMU2S upgrade kit
YOU CAN'T UPGRADE DIRECTLY FROM MK2S MMU1 to MMU2S !!! You need to upgrade to MK2.5S first.
In case you don't have an upgrade from MK2S to MK2.5S, you can order it on our eshop.
⬢The upgrade process is the following:
⬢Disassemble your MK2S MMU1
⬢Prepare the MMU1 motors for MMU2 assembly
⬢Upgrade your printer to MK2.5S
⬢Upgrade your MK2.5S to MK2.5S MMU2S

Step 2 Before you do anything!!!

Before you do anything!!!
Before you do anything!!!
Before you do anything!!!
DON'T RUSH !!! Make sure you have all the parts before you start disassembling your printer!
⬢The upgrade kit MK2 -> MK2.5 does not include all printed parts, you have to print some them on your own! However, as a courtesy the MMU2S upgrade includes all the parts for the MK2.5S extruder. No need to print them ;)
⬢All parts must be printed from PETG or similar material (ABS, etc.). STLs are available at our website: prusa3d.com/prusa-i3-printable-parts
⬢In case you use your own filament, make sure the extruder parts (FS-lever) are printed in black.
⬢Always read the instructions first before you proceed, most issues with the assembly are caused by not following them.

Step 3 サポートが必要な時はこちらから!

サポートが必要な時はこちらから!
サポートが必要な時はこちらから!
サポートが必要な時はこちらから!
⬢説明書がない、ネジがない、プリント部品のひび割れがあれば、お知らせください。
⬢以下の方法でお問い合わせください。
⬢各ステップの下からコメントをします。
⬢24時間365日対応のライブチャットshop.prusa3d.comをご利用ください。
⬢Emailはこちら。[email protected]
⬢Let's start with the upgrade in the next chapter - 2. MMU1の分解
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us