Ultem, also known as PEI (Polyetherimide), is a high-performance thermoplastic material ideal for 3D printing. Its extreme resistance to heat and chemicals makes it an excellent choice for demanding applications. With a temperature range from -70°C to over 200°C, Ultem offers high stability and strength across a wide range of environments. While it requires stable printing conditions and specialized equipment, the results are precise and durable. Ultem is particularly suitable for the automotive, aerospace, medical device industries, and prototyping, handling the challenges of even the most demanding environments.
PEI 9085 and PEI 1010
Pros |
Cons |
---|---|
✔ High-temperature resistance (over 200°C) |
✖ Higher cost |
✔ Exceptional chemical resistance |
✖ Susceptible to warping |
✔ Radiation resistance |
✖ Square objects are prone to warping. |
✔ Suitable as an insulating material |
✖ Highly hygroscopic (absorbs moisture) – requires |
✔ Self-extinguishing |
✖ Requires adhesives for better adhesion to the print |
✔ Dimensional stability during printing |
✖ Support removal can be difficult |
Clean and calibrate the printer.
Use a drybox to keep the filament dry.
Speed: Slower than usual.
Adhesion: 2-3 layers of Magigoo HT and use a brim.
Use a brim to enhance first layer adhesion.
Monitor the print closely.
Remove print quickly to avoid stress.
Remove supports while warm.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.