⬢Versions of the MMU2S manual:
⬢03/2019 - Initial version V1.00
⬢12/2020 - Update V1.01
⬢11/2021 - Update V1.02
Major changes for each version are described in the next steps.
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
- Home
- MMU2S
- Assembly manuals
- Original Prusa i3 to MMU2S upgrade
- Manual changelog MMU2S
Manual changelog MMU2S
Menu
- Original Prusa i3 to MMU2S upgrade
- 1. Introduction
- 2A. MK3S+ extruder disassembly
- 2B. MK3S/MK2.5S extruder disassembly
- 2C. MK3/MK2.5 extruder disassembly
- 3A. MK3S+ extruder upgrade
- 3B. MK3S/MK2.5S extruder upgrade
- 3C. MK3/MK2.5 extruder upgrade to MK3S/MK2.5S
- 4. Idler body assembly
- 5. Pulley body assembly
- 6. Electronics and MMU2S unit assembly
- 7. Spool holder and buffer assembly
- 8. Preflight check & Calibration
- 9. First flight
- Manual changelog MMU2S
- 1. Versions history
- 2. Changes to the manual (1)
Manual changelog MMU2S
Relevant for:
Last updated 3 years ago Difficulty
Moderate Steps
2 Available languages
⬢12/2020 - Original Prusa i3 MK3S+ additon
⬢The assembly manual was extended with instructions for MK3S+.
⬢11/2021 - New chapters added
⬢Two chapters added, describring the initial calibration (nr. 8) and the first print (nr.9).
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.