⬢Versions of the Original Prusa Enclosure manual:
⬢05/2024 - Initial version 1.1
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- Home
- Enclosure
- Assembly manuals
- Original Prusa Enclosure assembly
- Manual changelog Enclosure
Manual changelog Enclosure
Menu
- Original Prusa Enclosure assembly
- 1. Introduction
- 2A. Preparing the printer (MK4/S & MK3.9/S)
- 2B. Preparing the printer (MK3.5 Black PSU)
- 2C. Preparing the printer (MK3S+ Black PSU)
- 2D. Preparing the printer (MK3S+ Silver PSU)
- 3. Assembling the enclosure
- 4A. Installing the printer (MK4/S & MK3.9/S)
- 4B. Installing the printer (MK3.5 Black PSU)
- 4C. Installing the printer (MK3S+ Black PSU)
- 5. Fire Suppression System (add-on)
- 4D. Installing the printer (MK3S+ Silver PSU)
- 6. Hinged Lid (add-on)
- 6A. Hinged Lid with MMU3
- 6B. Hinged lid with MMU2S
- 7. Advanced filtration system (add-on)
- 8. Mechanical lock (add-on)
- 9. Quick release PSU cable - MK3S+ Black PSU (add-on)
- 10. Quick release PSU cable - MK4/3.9 Black PSU (add-on)
- 11. White LED strip (add-on)
- Manual changelog Enclosure
- 1. Versions history
Manual changelog Enclosure
Relevant for:
Last updated 8 months ago Difficulty
Very easy Steps
1 Available languages
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.