EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

2A. Printer Unboxing

Menu

2A. Printer Unboxing

2A. Printer Unboxing
Relevant for:
XL
Last updated 2 years ago
2A. Printer Unboxing
 Difficulty
Easy
 Steps
7
 Available languages
CSPLDEESITFRJA

Step 1 Introduction

Introduction
Introduction
The package with the printer is heavy! Always ask the other person for help with handling.
If children are involved, always supervise them to avoid injury.
We recommend keeping all the packaging material in case you decide to send the printer for service.

Step 2 Opening the package

Opening the package
Opening the package
Opening the package
Opening the package
⬢Place the package on a stable place. Make sure the package is oriented top side up. See the transportation label.
The box is equipped with two easy-to-tear zippers. They separate the box into two parts.
⬢Find the zippers on the edge of both long sides of the package.
⬢Gently pull the head of the zipper.

Step 3 Opening the package

Opening the package
Opening the package
Opening the package
Opening the package
The zips are designed to build on each other, no matter which one you start with.
⬢Tear zippers on both sides to fully separate the box. One zipper opens two sides, the longer and the shorter side.
⬢Now, the top part is separated from the bottom part.
⬢Slide the top part to separate the box upwards by the handles.
In the upper part, the cardboard fixings may stuck.

Step 4 Removing the fixations

Removing the fixations
Removing the fixations
Removing the fixations
There are cardboard fixings that contain the parts necessary for the assembly. Do not throw them out!
⬢Take off the front top fixation with the parts inside and put it on the safe place. We will need these parts later on.

Step 5 Removing the fixations

Removing the fixations
Removing the fixations
Removing the fixations
Removing the fixations
The cardboard fixings contain the parts necessary for the assembly. Do not throw them out!
⬢Take out included Prusament.
⬢The fixation is unlocked, remove the rear top fixation from the printer.
⬢Pull up the cardboard to unlock the bottom box from the main lower box part and take it off.

Step 6 Unpacking the printer

Unpacking the printer
Unpacking the printer
⬢Use the side handles on both sides of the printer to handle.
Do not hold the printer by the top metal profiles!!! Otherwise, you may warp the printer and damage the LED lighting inside the profiles.
Handle the printer in two persons.
⬢Hold the bottom box and pull out the printer. Place it in a designated area.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us