EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

2. Printer unboxing

2. Printer unboxing
Relevant for:
Last updated 7 months ago
2. Printer unboxing
 Difficulty
Easy
 Steps
8
 Available languages
CSPLDEESITFR
Introduction
Introduction
The printer package is heavy! Ask someone to help you out.
If children are involved, always supervise them to avoid an injury.
We recommend keeping all the packaging material in case you decide to send the printer back for service.
Opening the package
Opening the package
Opening the package
Opening the package
Place the package on a stable surface. Make sure the package is oriented top side up. See the transportation label.
The package is equipped with a tear strip that splits the box in two parts.
Peel off the entire tear strip to split the box.
Opening the package
Opening the package
Opening the package
Remove the top part of the box by lifting it up.
Inside, there are cardboard inserts that contain parts necessary for the assembly. Do not throw them out!
Removing the inserts
Removing the inserts
Removing the inserts
Removing the inserts
Remove the top front cardboard insert. There are parts inside
Remove the boxes on the side containing the Nextruder parts.
Remove the cardboard insert with the Haribos inside.
Removing the inserts
Removing the inserts
Removing the inserts
Remove the front inner insert.
Remove the welcome letter.
Remove the box with Prusament on top.
Removing the inserts
Removing the inserts
Removing the inserts
There is a lever inside the top cardboard insert that locks it to the printer’s frame. Pull the lever to unhook the insert.
While pulling the lever, lift the whole insert and remove it.
There are printer parts inside the top cardboard insert! Make sure not to lose them!
Unpacking the printer
Unpacking the printer
Use the side handles on the printer to lift it up.
Do not handle the printer by the top metal profiles!!! Otherwise, you may warp the printer parts and damage the parts such as the LED lighting inside.
Handle the printer in two people by the sides.
Hold the bottom of the box while you lift the printer up.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us