EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

1. Introduction

1. Introduction
Relevant for:
Last updated 4 years ago
1. Introduction
 Difficulty
Very easy
 Steps
10
 Available languages
CSPLESDEITFRJA
Preparing the upgrade kit
Preparing the upgrade kit
Preparing the upgrade kit
Welcome to the tutorial how to upgrade your Original Prusa i3 MK3 to Original Prusa i3 MK3S
Please prepare the upgrade kit received from Prusa Research.
WARNING: This assembly guide is valid ONLY FOR SINGLE MATERIAL MK3S!!! For MK3S MMU2S, please follow this guide Original Prusa i3 MK3S to MMU2S Different parts are needed!
This MK3 to MK3S upgrade focuses only on the new Extruder design. Other parts of the printer can differ from yours, but there is no need to upgrade them.
Getting the necessary tools
Getting the necessary tools
For this upgrade you will need:
Needle-nose pliers (1x)
Allen key 2.5 mm (1x)
Allen key 2.0 mm (1x)
Allen key 1.5 mm (1x)
Slotted screwdriver for the belt insertion (optional)
No soldering is required. No wire crimping is required.
Tools are not included.
Labels guide
Labels guide
All the boxes and bags including parts for the build are labelled.
This bag is used as an example.
Use labels for reference
Use labels for reference
Use labels for reference
Most of the labels are scaled 1:1 and can be used to identify the part :-)
For the most common screws, nuts and PTFE tubes. You can also use the enclosed letter, which contains Prusa Cheatsheet on the other side.
You can download Prusa Cheatsheet from our site. Print it at 100 %, don't rescale it, otherwise it won't work.
View high resolution images
View high resolution images
When you browse the guide on help.prusa3d.com, you can view the original images in high resolution for clarity.
Just hover your cursor over the image and click the Magnifier button ("View original") in the top left corner.
Printed parts - versioning
Printed parts - versioning
Most of the 3D printed parts on Original Prusa i3 MK3S are marked with their version.
Cx series (e.g. C1) - those parts are printed on Prusa Research farm and are distributed with the kit.
Rx series (e.g. R4) - those parts are available for download and printing by the user. They are identical to the factory ones.
In case you have issues while assembling the printer with the certain printed part, please try to find this label and tell it to our support team.
Printed parts in the picture are used as an example, yours might be different.
Printed parts - self printing
Printed parts - self printing
Printed parts - self printing
Before we start disassembly, you need to print (or purchase) all the necessary parts. If you already have the parts, you can skip to the next step.
For MK3 to MK3S upgrade you need to print the extruder parts, which are separated into more G-codes. Use enclosed BLACK PETG or similar material. The colour should be black to avoid issues.
G-codes and STL files are available on our website: prusa3d.com/prusa-i3-printable-parts
For printing individual parts it is recommended to use Slic3r PE with 0.2 mm layer height, GRID infill at 20%, no supports!
Fan-shroud must be printed from ABS/ASA only!!! We include this part in the upgrade package.
No need to print the Y-axis parts, their main purpose is easier assembly.
Pro tip: inserting the nuts
Pro tip: inserting the nuts
Pro tip: inserting the nuts
Pro tip: inserting the nuts
3D printed parts are very precise, however, there still might be a tolerance in the printed part and same goes for the size of the nut.
Therefore it might happen, that the nut won't fit easily in or might be falling out. Let's see, how to fix it:
Nut won't fit in: use a screw with a thread along its entire length (typically: M3x10, M3x18) and screw it from the opposite side of the opening. While tightening the screw, the nut will be pulled in. Remove the screw afterwards.
Nut keeps falling out: Use a piece of tape to fix the nut temporarily in place, as soon as you insert the screw in, you can remove the tape. Using glue isn't recommended as it can partly reach into the thread and you won't be able to tighten the screw properly.
Every time we recommend to use the "screw pulling technique", you will be reminded with Joe's avatar ;)
Parts in the pictures are used as an example.
How to successfully finish the assembly
How to successfully finish the assembly
How to successfully finish the assembly
To successfully finish the assembly please follow all these:
Always read all the instructions at current step first, it will help you to understand, what you need to do.
Don't follow pictures only! It is not enough, the written instructions are as brief as they could be. Read them.
Read the comments from the other users, they are great source of ideas. We read them too and based on your feedback improve the manual and the entire assembly.
Use a reasonable force, the printed parts are tough, but not unbreakable. If it doesn't fit, check your approach twice.
Most important: Enjoy the build, have fun. Cooperate with your kids, friends or partners. However, we take no responsibility for possible fights ;)
READY? You can start by 2. Extruder disassembly
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us