⬢This guide will take you through the installation of the Mechanical lock on the Original Prusa MINI Enclosure.
Los elementos de fijación suministrados contienen piezas de repuesto adicionales.
ES
Iniciar sesión- English
- Čeština
- Italiano
- Deutsch
- Polski
- Français
- Home
- MINI+
- Manuales de montaje
- Original Prusa MINI Enclosure
- Mechanical lock (add-on)
Mechanical lock (add-on)
Menu
- Original Prusa MINI Enclosure
- 1. Introduction
- 2. Assembling the Enclosure
- 3. Installing the printer
- Advanced filtration system (add-on)
- White LED strip (add-on)
- Fire Suppression System (add-on)
- Mechanical lock (add-on)
- 1. Introduction
- 2. Herramientas necesarias para este capitulo
- 3. Additional tools
- 4. Desmontaje del panel de la puerta
- 5. Mechanical lock: parts preparation
- 6. Montaje de la carcasa de la cerradura
- 7. Securing the lock housing
- 8. Montando el mecanismo de cierre: preparación de las piezas
- 9. Montaje del mecanismo de cierre
- 10. Securing the lock mechanism
- 11. Good job!
- Registro de cambios del Manual del kit de MINI Enclosure
Mechanical lock (add-on)
Relevante para :
Ultima actualización 3 months ago Dificultad
Fácil Pasos
11 Idiomas disponibles
⬢Para este capítulo, prepara por favor:
⬢2.5mm Allen key
Tools that are not included but can make assembly easier, especially when installing add-ons.
⬢Additional tools:
⬢Needle-nose pliers for securing the E-clip washer
⬢Open the door.
⬢On the door panel, remove two M3x8 screws securing the door-handle and remove it from the panel. Don't throw the screws away!
⬢Nice, we are ready to assembly the mechanical lock.
⬢Para los siguientes pasos, por favor prepara:
⬢M3x8 screw (2x) removed in the previous step
⬢MINI Enclosure Door Handle (1x)
⬢Magnet 20x6x2 (2x)
Keep the magnets apart in a sufficient distance. They can break each other!
⬢Tuerca de la carcasa de la cerradura (1x)
⬢Lock housing (1x)
⬢Lock wrench (1x)
⬢Insert two magnets all the way into two pockets in the door handle.
The polarity of the magnets doesn't matter.
⬢Turn the door handle.
⬢Insert the lock housing into the same shape opening in the door handle.
⬢From the opposite side:
⬢Insert the nut onto the lock housing.
⬢Asegura el alojamiento de la cerradura apretando la tuerca del alojamiento de la cerradura. Utiliza la llave para facilitar el apriete.
⬢Attach the door handle on the door panel and secure it with two M3x8 screws.
⬢Para los siguientes pasos, por favor prepara:
⬢Lock (1x)
⬢Palanca de la cerradura (1x)
⬢E-clip washer (1x)
⬢Insert the Lock into the lock mount.
⬢Hold the Lock in the Lock mount with your hand and turn the door panel.
⬢Attach the mechanical Lock Lever to the Lock as shown in the picture. The lock lever must face upwards.
⬢Place E-clip washer on the Mechanical Lock Lever against the lock.
⬢Using Needle-nose pliers, push the E-clip washer on the lock to secure the lock mechanism.
⬢The Mechanical Lock is ready. Compare the picture with your Mechanical Lock.
⬢Perfect! You just successfully assembled the Mechanical lock on your Original Prusa MINI Enclosure. Let's try it out!
¿Fue útil esta guía?
Comentarios
¿Todavía tienes preguntas?
Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.