- Čeština
- Italiano
- Deutsch
- Polski
- Français
- Home
- Using the printer
- Printer maintenance
- Changing or replacing the Prusa Nozzle
Changing or replacing the Prusa Nozzle
- 3D models
- Material guide
- Slicing
- Printer maintenance
- Adjusting belt tension (MINI/MINI+)
- Adjusting belt tension (MK4/S, MK3.9/S, MK3.5/S, MK3/S/+)
- Adjusting belt tension (XL)
- Buddy electronics Wiring (MINI)
- Changing or replacing the Nextruder Hotend
- Changing or replacing the nozzle (MK2.5/S, MK3/S/+, MK3.5/S)
- Changing or replacing the Prusa Nozzle
- Do I have the Prusa Nozzle?
- Methods for replacing the Prusa Nozzle
- Changing the print head
- Changing/replacing the nozzle (MINI)
- Checking/re-aligning the Bondtech gear (MK3.5/S, MK3S/+, MK2.5S)
- Cold pull (MINI)
- Cold pull (MK3/S/+, MK2.5/S, MK3.5/S)
- Cold pull (MK4/S, MK3.9/S, XL) #13702 #17702
- Community translations
- CW1 maintenance
- FEP film replacement (SL1)
- Fire Suppression system (Enclosure)
- Firmware updating (CW1)
- Firmware updating (MINI/MINI+)
- Firmware updating (MK2.5S/MK2S)
- Firmware updating (MMU2S)
- Firmware updating (SL1/SL1S)
- HEPA filter replacement (HT90)
- Hotend disassembly & heatbreak stuck in the heatsink
- How to downgrade firmware (MK4/S, MK3.9/S, MK3.5/S, XL)
- How to remove a stripped screw
- How to update firmware (HT90)
- How to update firmware (MK3S+/MK3S/MK3)
- How to update firmware (MK4/S, MK3.9/S, MK3.5/S, XL)
- How to update firmware (MMU3)
- i3 Printer Regular Maintenance
- Installing or changing the Nextruder V6 Nozzle Adapter
- IPA pigment filter (CW1/CW1S)
- MMU2S regular maintenance
- MMU3 regular maintenance
- Nozzle replacement (HT90)
- PETG sheets (Enclosure)
- Print surface preparation
- Printing without purge tower on the XL (Multi-Tool)
- Regular maintenance (MINI/MINI+)
- Regular printer maintenance (HT90)
- Regular printer maintenance (MK3.5/S)
- Regular printer maintenance (MK4/S, MK3.9/S)
- Regular printer maintenance (XL)
- Removing filament from extruder manually
- SD cards and USB drives
- SL1/SL1S maintenance
- SL1/SL1S print removing
- Testing safety features (MK3/MK3S)
- Vibration/noise when printing (MINI/MINI+)
- Prusa Connect & PrusaLink
Replacing the Prusa Nozzle on your printer varies depending on the model of your printer. This article provides an overview of the different methods to replace the Prusa Nozzle, directing you to the appropriate guides for your specific printer model.
Do I have the Prusa Nozzle?
Every MK4S, MK3.9S, MK4, MK3.9 and XL that is shipped from our company comes with the Prusa Nozzle installed or included in the kit.
Methods for replacing the Prusa Nozzle
There are two different ways to replace the nozzle for each model. We have designed the Nozzle Replacement Tool that makes the process easier and quicker, but it requires printing the tool first.
MK4S/MK3.9S
- How to replace the Prusa Nozzle (MK4S/MK3.9S)
- How to replace the Prusa Nozzle (MK4S/MK3.9S) using the MK4S Nozzle Replacement Tool (instructions in the description on Printables.com)
MK4/MK3.9
- How to replace the Prusa Nozzle (MK4/MK3.9)
- How to replace the Prusa Nozzle (MK4/MK3.9) using the MK4 Nozzle Replacement Tool (instructions in the description on Printables.com)
XL Single-tool
- How to replace the Prusa Nozzle (XL single-tool)
- How to replace the Prusa Nozzle (XL single-tool) using the XL Nozzle Replacement Tool (instructions in the description on Printables.com)
XL Multi-tool
- How to replace the Prusa Nozzle (XL multi-tool)
- How to replace the Prusa Nozzle (XL multi-tool) using the XL Nozzle Replacement Tool (instructions in the description on Printables.com)
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.